hi jeffrey nelson
my name is Jaspreet i am interested in one of your product "lasershark board". i am working on one of my client project which is "stereolithography uv printer" i know little about galvo motor through which we can achieve speed for SLA uv printer i been searching online and reading blogs and lot of people prefer your board to control galvo motors because its open source n custom.
For starting to understand galvos i purchased cheap Chinese galvo motors which comes with laser projector (10k to 20k speed & 8bit or 12bit DAC) please check attached pics and files and i have few questions regarding lasershark board :
Questions:
1.is it possible lasershark board can control these Chinese galvo motor and galvo drive ?
2.do i need separate lasershark board for X&Y motor or one board can handle both X&Y
motors?
3. is this board is just plug n play wires according to settings of hardware and software or i
need to do some kind of programming to setup for galvo motors only not for stepper
motors ?
4.do you have any windows application to run your lasershark board ?
5.according to your website new version of lasershark board 2.1a is available in your store,
do u have its latest firmware 2.1a opensource also ? in case of any custom programming
needed in future ?
6.can you tell me what else galvo motor brands can lasershark board support accept
Chinese laser galvos for example brands like (cambridgetechnology,SCANLAB,Thorlabs )?
please suggest less expensive galvo motor n drive.
7. do u have any firmware which follow XY2-100 protocol ?
this is the link for chinese laser projector i bought from ebay incase link required :
(https://www.ebay.com/itm/20KPPS-30KPPS-laser-scanning-galvo-scanner-ILDA-Closed-Loop-max-30kpps-for-laser-/261517002270?rsta=en_IN(en_IN)&cnac=IN&mail=sys&e=op&unp_tpcid=xpt-auction-GXOTx&ppid=PPX000605&calf=9b28eff345c08&calc=9b28eff345c08&pgrp=main:email&unptid=7030a684-a82f-11e7-8875-5cb90192cb40&mchn=em&t=&s=ci&page=main:email&cal=9b28eff345c08&cust=1WL62553GY683905F)
sorry for the big link this is what they have
Thank you
Jaspreet
my name is Jaspreet i am interested in one of your product "lasershark board". i am working on one of my client project which is "stereolithography uv printer" i know little about galvo motor through which we can achieve speed for SLA uv printer i been searching online and reading blogs and lot of people prefer your board to control galvo motors because its open source n custom.
For starting to understand galvos i purchased cheap Chinese galvo motors which comes with laser projector (10k to 20k speed & 8bit or 12bit DAC) please check attached pics and files and i have few questions regarding lasershark board :
Questions:
1.is it possible lasershark board can control these Chinese galvo motor and galvo drive ?
2.do i need separate lasershark board for X&Y motor or one board can handle both X&Y
motors?
3. is this board is just plug n play wires according to settings of hardware and software or i
need to do some kind of programming to setup for galvo motors only not for stepper
motors ?
4.do you have any windows application to run your lasershark board ?
5.according to your website new version of lasershark board 2.1a is available in your store,
do u have its latest firmware 2.1a opensource also ? in case of any custom programming
needed in future ?
6.can you tell me what else galvo motor brands can lasershark board support accept
Chinese laser galvos for example brands like (cambridgetechnology,SCANLAB,Thorlabs )?
please suggest less expensive galvo motor n drive.
7. do u have any firmware which follow XY2-100 protocol ?
this is the link for chinese laser projector i bought from ebay incase link required :
(https://www.ebay.com/itm/20KPPS-30KPPS-laser-scanning-galvo-scanner-ILDA-Closed-Loop-max-30kpps-for-laser-/261517002270?rsta=en_IN(en_IN)&cnac=IN&mail=sys&e=op&unp_tpcid=xpt-auction-GXOTx&ppid=PPX000605&calf=9b28eff345c08&calc=9b28eff345c08&pgrp=main:email&unptid=7030a684-a82f-11e7-8875-5cb90192cb40&mchn=em&t=&s=ci&page=main:email&cal=9b28eff345c08&cust=1WL62553GY683905F)
sorry for the big link this is what they have
Thank you
Jaspreet