Messages

1

3D Printers / Re: LaserShark and Creative Workshop test run

« on: September 08, 2014, 04:10:42 AM »

Yeah already use latest firmware v5

Only problem we got is on win7 64bit.

There are some problems when we use the lasershark on win7 64bit the blanking is not working good i will put 2 links from movie made win7 64bit.
First link is with only connected the lasershark on the computer with win7 64bit.
Second link is with lasershark and webcam that is standing on with win7 64bit.

1. https://www.dropbox.com/s/zc849gxvdwygy ... 1.mp4?dl=0
2. https://www.dropbox.com/s/mqjwm0c69n848 ... 7.mp4?dl=0

When i use the lasershark on win7 32bit everything working fine also make movie from that.

1. https://www.dropbox.com/s/mqjwm0c69n848 ... 7.mp4?dl=0

I have post this also on sla forum think it's problem for steve but maybe
it's combination

Greetings Stimpy

2

3D Printers / LaserShark and Creative Workshop test run

« on: September 07, 2014, 09:45:35 AM »

Hello all

Here a testrun from Lasershark and CW.

https://www.youtube.com/watch?v=EjlhJz2zh7w

More info on http://www.buildyourownsla.com

Greetings Stimpy

3

3D Printers / Re: HowTo: Compilling Lasershark 3DP with Cygwin64 on Win7 64Bit

« on: June 20, 2014, 07:44:24 AM »

Hello all,

Have speak to pacmanfac the creator of creation workshop.
He have it working for 95% and say that er will be a working beta in a week or so
That would be nice hehehe

Greetings Stimpy

4

3D Printers / HowTo: Compilling Lasershark 3DP with Cygwin64 on Win7 64Bit

« on: June 16, 2014, 06:31:29 PM »

Hello all

I will explain how to compile LaserShark-3dp on Windows 7 Ultimate 64bit.
First thing todo is download setup-x86_64.exe from this site https://www.cygwin.com/install.html
Install cygwin64 full some error messages will popup that's no problem.
This will take some time to install.

After install you start Cygwin64 Terminal. Cygwin will make new user account.
I have make a movie of everything the link of the movie is :

https://www.youtube.com/watch?v=OEjNz98W8XI

Some other links needed for compiling u will see in movie.

https://github.com/cinemast/libjson-rpc-cpp.git
https://github.com/macpod/lasershark_3dp.git
https://github.com/macpod/lasershark_hostapp.git

Movie of installing Zadig USB and starting the software

https://www.youtube.com/watch?v=h7AyS6H2A0M

Movie maked with my phone to let see what the lasershark and twostep module is doing when software is started.

https://www.youtube.com/watch?v=oLjOevr1UPA

That is what i have get working and hope to get some other software working.
Have heard that creationworkshop software something gona do with it but not sure. Hope to get more peeps interest for this project.

Also make a wiki on http://ls3dp.spice.net.au

Greetings Stimpy
 

5

3D Printers / Re: LaserShark 3DP for windows 7 64bit

« on: June 16, 2014, 08:46:15 AM »

hello all

The new release from macpod i can make it also in windows 7 64bit.
I will make a post how to compile everyhting so you can do it by your self.
I think it will be online toonight.

Greetings all

6

3D Printers / Re: Linear rail set from ebay.

« on: April 21, 2014, 07:57:54 AM »

They are realy nice and good prices.
Maybe i will order also a set

7

LaserShark Discussion / Re: Bigger project area and wobbly lines, louder mirro after system meltdown/reinsta

« on: April 12, 2014, 11:54:22 PM »

Maybe it's wrong audiosetting in qjackctl. Or some strange audio connection.

8

3D Printers / Re: LaserShark 3DP for windows 7 64bit

« on: April 07, 2014, 06:56:45 PM »

I have used cygwin64 full installed to compile on windows 7 64bit. And there where no problems with it. Cmake not so familiar with it but will read and try some things.
But lets wait till you are back next week then we can chat maybe on irc

9

3D Printers / LaserShark 3DP for windows 7 64bit

« on: April 06, 2014, 12:18:57 PM »

Hello All

I have compiled the LaserShark 3DP software for windows 7 64bit.
I will try also for 32bit version of windows.

Download installer or rar file.

https://www.dropbox.com/s/mxdvb8bp8w52hn4/LaserShark%203DP.msi
https://www.dropbox.com/s/qy0ohefa0qsd2qf/LaserShark%203DP.rar

Let me know if you got problems with it maybe you get libusb problem.
Download zadig from http://zadig.akeo.ie/ and install libusb driver.

Greetings Stimpy

10

OpenLase Discussion / Re: Trouble working with playilda

« on: April 05, 2014, 08:13:06 PM »

I got the same problem with the ilda files they not run only the first frame and then they stop. That is software problem.

11

3D Printers / Re: My test Setup of lasershark and twostep

« on: April 05, 2014, 08:08:12 PM »

Hey jeffrey

Yeah i know and maybe i will put some cooling on the stepper ic's.

I got the lasersharkserver and client en twostepserver and client working in windows 7 64bit with cygwin64 full installed then download and compile, install the json rpc then download the lasershark_3dp from github unpack it in a folder then download the lasershark host app and copy this in the twostep map from the lasershark_3dp source. compile tjhe lasershark_3dp and it wil work. Got the same output from the software when i try on linux. Still wanna try it on 32bit i get some error when compiling.

Greetings Michel

12

3D Printers / Re: My test Setup of lasershark and twostep

« on: April 04, 2014, 07:54:51 PM »

Oke that will help it's the other way around.

13

3D Printers / My test Setup of lasershark and twostep

« on: April 04, 2014, 06:01:09 PM »

Hello all

This is my test setup of lasershark and twostep.
And get the lasershark working in linux and some problems on windows i need to test some thing for that and have spoke to jeffrey and got the new software 3dp also running in linux.
I got one problem i don't get power from the twostep to power the lasershark of whas that wrong seeing in the wiring.
Still need nice gui but let see what happen. Also can help with install and compiling software from lasershark or twostep.

New LiveStream : http://ustre.am/ExAX

https://www.youtube.com/watch?v=gX7oyyHpFPM&feature=youtu.be

Greetings

Stimpy(Michel)