Macpod LLC: Forums
General Category => LaserShark Discussion => Topic started by: SL on March 17, 2019, 10:07:42 AM
-
Hello macpod forum users,
I have some galvos which I am driving using a custom python script via a microprocessor, DAC chip and some OpAmps. All working as expected but I can't use this to tune my galvos.
Therefore I wanted to swap to using a laser shark. Before I purchase one I wanted to check, how to display the ilda test images using macpod? I feel like this should be quite easy but somehow I couldn't find a definitive answer.
Any help would be much appreciated,
Thanks,
Simon
-
Hi Simon,
The dearth of information likely stems from the fact people either use the LaserShark with OpenLase for dynamic output, for 3d printers, or for other scientific/telecommunication/industrial purposes.
OpenLase does have a very basic ilda file player. it talks directly with jack so you will need to add connection in patchbay to use it. I've attached a screenshot of my patchbay. If you set this up you can test it out with the simulator without needing to buy/make a LaserShark first. I would recommend this so there aren't any unexpected surprises
playilda <ilda file>
playilda -s <ildafile> <rate>