Support > LaserShark Support

Lasershark help

<< < (2/2)

Macpod:
Hi Necdet,

I would suggest you checkout CreationWorkshop. Several individuals there are working on using the LaserShark with this software to develop their own SLA printers.

Specificially this forum might be of interest:
http://www.buildyourownsla.com/forum/viewforum.php?f=6&sid=114b069d7a8625c0e9f2608694a9c8c3


If you want to develop your own software you can take a look at my github repo to see how I communicate with the Lasershark. I would encourage you to use bulk transfers vs isochronous transfers.
https://github.com/macpod/lasershark_hostapp
https://github.com/macpod/lasershark_3dp

You can also develop programs which outputs data in the format expected by lasershark_stdin.exe. This page explains how to setup the usb drivers and also
http://macpod.net/electronics/lasershark/lasershark_usage_windows.php
It looks like you have already set this up however

Navigation

[0] Message Index

[*] Previous page