General Category > 3D Printers

LaserShark and Creative Workshop test run

(1/2) > >>

Stimpy:
Hello all

Here a testrun from Lasershark and CW.

https://www.youtube.com/watch?v=EjlhJz2zh7w

More info on http://www.buildyourownsla.com

Greetings Stimpy

Macpod:
Nice work stimpy!

Just an FYI too..
You may have noticed that there is a new firmware (release V5). This came out to address an issue where if there are still samples present in the lasershark and the output is turned out before they are finished, they will not be cleared and may unintentionally be displayed when a new layer is being printed.

I suspect this update may cause issues with Creative Workshop due to an algorithm change however Steve should be able to quickly make a patch by reviewing my latest commits to the lasershark_3dp code.

Stimpy:
Yeah already use latest firmware v5 :P

Only problem we got is on win7 64bit.

There are some problems when we use the lasershark on win7 64bit the blanking is not working good i will put 2 links from movie made win7 64bit.
First link is with only connected the lasershark on the computer with win7 64bit.
Second link is with lasershark and webcam that is standing on with win7 64bit.

1. https://www.dropbox.com/s/zc849gxvdwygy ... 1.mp4?dl=0
2. https://www.dropbox.com/s/mqjwm0c69n848 ... 7.mp4?dl=0

When i use the lasershark on win7 32bit everything working fine also make movie from that.

1. https://www.dropbox.com/s/mqjwm0c69n848 ... 7.mp4?dl=0

I have post this also on sla forum think it's problem for steve but maybe
it's combination :D

Greetings Stimpy

Macpod:
If it works fine with 32 and not 64, this is going to be a host-side issue vs a lasershark issue.

The URLs you posted are all 404s :(

danielm:
Hi Jeff, I am also testing Lasershark with CW and I am having some issues - artifacts during scanning.
In this video entire working area is being scanned and several times the galvos are performing some undesired movements - you can also hear it in the video:
https://drive.google.com/file/d/0B2mvAuXuxQ6BbjFkZC0yMTBDNzg/edit?usp=sharing

During these issues the D1 LED goes brighter than usual.

Do you have any idea what might go wrong? Thank you for any help.

Navigation

[0] Message Index

[#] Next page